Yes, NTC cleaning can be carried out on live equipment without the need for shutdown or disconnection. This is made possible by the product's specific properties:

• Dielectric strength of 99,300 V (certified to IEC 60156:208)
• Non-conductive properties guarantee the safety of electrical equipment
• Rapid evaporation in just 3 minutes at 20°C
• Low-pressure application (5.2 kg/cm²) without risk to components

This technology has been used for over 20 years without incident on live installations, as attested by the certifications and tests carried out by the Malaysian University of Technology.

Cleaning with our technology offers several measurable advantages:

• Reduces equipment temperature by 10 to 30%.
• 200% improvement in insulation resistance (from 2000MΩ to 4000MΩ)
• Elimination of corona discharges that reduce energy efficiency
• Failure prevention (60% of computer failures can be avoided by preventive dusting)
• Forms a protective layer to prevent future dust build-up

Extend equipment life by at least one year

The optimum cleaning frequency depends on the environment and the type of equipment:

• Industrial environments or coastal areas: check every 6 to 8 months.
• Inverters and similar equipment: 12-month cleaning cycle
• Energy storage systems: 1-2 year cleaning cycle
• Datacenters: generally every 3-4 months

We offer customized assessments and annual maintenance contracts to determine the optimum schedule for your specific needs.

Our services comply with the following standards and certifications:

• IEC 60156:208 compliance
• SIRIM MSDS certification
• Dielectric tests approved up to 35 kV by the Technological University of Malaysia

Our technicians are certified to Belgian electrical clearance standards. BA4, BA5 and VCA (Safety, Health and Environment) certification

A standard intervention consists of several stages:

• Initial diagnosis: Assessment of the condition of the environment to be cleaned. Optional thermographic imaging to identify hot spots and document post-treatment anomalies and performance.
• Preparation: Installation of equipment and setting up of a personal safety zone.
• Application: Low-pressure spraying of NTC on equipment
  Application takes about 10-15m per square metre.
• Evaporation: The product evaporates in 3 minutes, taking contaminants with it.
• Verification: Post-intervention thermographic inspection to measure and document improvement
• Documentation: Detailed report with before-and-after images and temperature measurements

The whole process is carried out without interrupting your equipment services.

Get in touch with us now to obtain a price quotation and a response time. Our operational area is Belgium, Luxembourg and Northern France. (Travel costs will vary according to the distance involved).